Prairie View Industries
Wheel-A-Bout Ramp
PVI has the solution to large ramps that are
heavy and awkward to maneuver. The new,
portable Wheel-A-Bout ramp’s innovative
design allows consumers to store the ramp
upright in a garage and then effortlessly roll
it to where it is needed. To set up, simply
fold down the bottom section, attach the
support straps with quick-release pins, and
position it up on the step. Just like that,
you have a solid, sturdy ramp that took
little effort to set up. The full 30" platform
provides excellent stability. The Wheel-A-Bout
ramp is available in 10' and 12' lengths
to best fit different environments.
Prairie View Industries
Multifold Ramp
The Multifold ramp is the only one on the
market with a patented no-pinch center-hinge
design. While major pinch areas on
ramps dominate the market, PVI eliminated
this concern, allowing hands to safely stay
in the center while folding the ramp out for
use. Strength is also a major advantage: The
Multifold has a weight capacity of 800 lbs. A
uniquely lightweight design easily separates
into two pieces for convenient transport and
setup. It is offered in a variety of lengths
and features a 30" wide platform to provide
superior stability for mobility devices with
various wheel configurations.
AlumiRamp, Inc.
Armada System
Alumiramp’s residential modular ramp system is extremely light and flexible to make installations faster than ever. Armada can also be easily moved or reconfigured as needs change. The ramp is made of anodized aluminum for a long-lasting, easy-to-maintain finish, and can be easily assembled with a 1/2" wrench. The heavy-duty welded aluminum will not chip, flake, rust or oxidize, and ramp legs can be recessed under the system for a clean look. The ramp is fully height and slope adjustable with all stainless-steel fasteners, universal platforms, and a 10-year warranty. The Armada complies with ANSI and ADA guidelines.
American Access
Entrada Ramp
The Entrada commercial ramp has been designed to provide access to offices, schools, municipalities and modular buildings. This ramp is ADA, IBC, BOCA and OSHA compliant and is designed to meet most federal and state code requirements. A wide range of ramp lengths and platform sizes enables customers to choose the components required to build ramp systems that meet their specific needs and configurations.
Mac's Lift Gate Inc.
Vertical Home Lift
Mac’s PL-50, PL-72 and PL-90 vertical home lifts are designed and engineered for everyday use, with a 750-lb. weight capacity and virtually maintenance-free operation. The lifts operate in all weather conditions from -30° to +120°F and are weather proofed and sealed. The lifts operate on a 110 VAC and draw 7 amps when in use. Includes an emergency manual crank and five-year warranty.
Diestco Manufacturing Corp.
EZ Edge Ramps
These durable, slip-resistant ramps are designed to be easy to install, modify and use. The sloped sides allow a wheelchair, scooter or rollator to enter doorways from any angle. The solid rubber ramps can be easily trimmed to fit different heights and to fit around doorjambs. EZ Edge threshold ramps are available at multiple heights and meet the recommended 1:12 slope ratio.
Prairie View Industries
Wheel-A-Bout
The new Wheel-A-Bout portable ramp is the answer when large, heavy, hard-to-maneuver ramps are the challenge. Wheel-A-Bout stores upright in a garage, then effortlessly rolls out when needed. Set it up by folding down the bottom section, attaching the support straps with quick-release pins, and positioning it up on the step. The 30" platform offers excellent stability. The ramp comes in 10' and 12' lengths.
National Ramp Corp.
Liberty Series
The Liberty series comprises maintenance-free aluminum ramps with non-slip, solid deck surfaces. The ramps are ADA compliant and can be quickly installed. A continuous handrail from the ground to a home’s front door provides greater safety and peace of mind for people with mobility limitations or those who use wheelchairs or scooters for personal transportation.
AlumiRamp, Inc.
Alumilite Landscape
The powdercoated finishes of this series of ramps enhance their surroundings while providing all the features of the standard Alumilite ramp line. Finishes include Terracotta, Slate (pictured), Sage and Sand. Models run from 3' to 5' long and 29" to 36" wide, with weight capacities of 600 lbs. Choose folding or solid configuration. Custom sizing is also available to meet specific needs.
Modular Ramp
This ramp line can be configured specifically for each consumer’s home and has ADA-compliant features built in. Ramps have a grooved walking surface and handrails. Custom widths and platforms are available, and the ramp is easily removed and reinstalled at a new location. Ramps are made of aluminum with welded construction and never require painting or maintenance. Sizes run from 2' to 8', but custom sizes are also available.